I-CARBON ROD/iintonga zokugoba/i-electrode yokugoba

1. Umgaqo
   

Ukuvelisa i-Arc phakathi kwentonga yeCarbon kunye nesinyithi esisisiseko, kunye nokunyibilikisa isinyithi esisisiseko ngobushushu ngaxeshanye, kunye nokususa iintsimbi ezinyibilikisiweyo ngomoya oxineneyo ojikeleze intonga yeCarbon.

1. Iimpawu
   
2. Ngenxa yenkqubo yokusebenza ekhawulezayo, inika ukusebenza kakuhle okuphezulu kwaye yonga iindleko.
3. Kwenza umsebenzi olungileyo ube lula.
4. Ngenxa yokuba i-Arc isebenzisa inxalenye encinci yesinyithi esisisiseko ngokugxininisa inqaku elinye kuphela, okomzuzwana umoya ocinezelweyo ophakamileyo ususa isinyithi esinyibilikisiweyo kwaye uphole, akukho tshintsho lobushushu obuphezulu, ukuqhekeka okanye izinto ezibonakalayo.
5. Kulula ukufumana iziphene zokuwelda kwicala lokulinganisa, oku kungaba kukuhlolwa kokuwelda. Kwaye kulula ukubona iindawo ezineziphene xa kufuneka zihlolwe nge-X-ray.
6. Inika ingxolo ephantsi kwaye phantse ayidinwa.
7. Inceda ukusika ngokukhawuleza ngokugqiba kakuhle umphezulu wokusika kunye nokunyusa ubushushu obuphantsi.
8. Ingasetyenziselwa ukusika ipleyiti yesinyithi, intsimbi esisiseko, isinyithi esidibeneyo, intsimbi engatyiwayo, intsimbi yemanganese kunye ne-alloy yobhedu kunye nezinye iintlobo zesinyithi.

1. Iimpawu zeCarbon Rod
   

  Intonga yekhabhoni esetyenziselwa inkqubo yomoya we-arc yenziwa ngokuxuba i-graphite ecocekileyo yomgangatho ophezulu kwaye icutshungulwe ngoxinzelelo oluphezulu, ishushu kakhulu ngekopolo, yenziwe ukuba ingatyiwa bubushushu be-arc kwaye imelane nobushushu obuphezulu.

*Iimpawu 1) Ukumelana nombane: ngaphantsi kwe-2mOwu-i-cm²

2)Umxhuzulane uwonke: ngaphezulu kwe-1.65/cm²

3)Ikhabhoni eQinisekileyo: ngaphezulu kwe-98.5%

4)Ubunzima: Ngaphezulu kwama-30 (ama-50 elunxwemeni)

5)Ukumelana nokukrazula: 300 kg/cm²

*Ukukhetha ubungakanani bentonga yekhabhoni Ububanzi begroove(mm)=ububanzi bentonga(mm)*1.5

1. Indlela yenkqubo-Inkqubo yoMoya we-Arc
   
   1. Ukususa iziphene zokuwelda ekulinganiseni  
      

1)Lungisa ivalvu yomoya wetotshi uze utyhalele phambili ngokuvelisa i-arc phakathi kwentonga yekhabhoni kunye nesinyithi esisisiseko.

2)I-engile eqhelekileyo phakathi kwentonga kunye nesiseko sesinyithi: 45°

3)Kulungile ukugcina isantya senkqubo nge-0.6mm/min.

4)Ingqayi yekhabhoni inomlinganiselo we-1.5m-2.5 kwaye ithatha imizuzu emi-2-5.

5)Intonga yekhabhoni ingasetyenziswa kude kuphele i-5cm.

1. Ukususa kwii-castings
   

1)Ngelixa ivelisa i-arc phakathi kwentonga kunye ne-castings kwaye nge-rod ejikelezayo isusa iintsimbi ngobushushu be-arc.

2)Ukuba i-engile yenkqubo inkulu kwi-base metal, ingasuswa nzulu.

1. Ukusika
   

1)Gcina intonga yekhabhoni ithe ngqo phezulu uze uqhubele phambili

2)Isantya senkqubo 0.5m-2m/min

3)Isika nentsimbi engatyiwayo, i-casting kunye ne-brass ezinzima kakhulu ukuzisika ngegesi, kwaye isika ngokukhawuleza kakhulu.

1. Ukwenza umngxuma
   

1)I-engile eqhelekileyo phakathi kwentonga yekhabhoni kunye nomphezulu wesinyithi esisisiseko.

2)Faka isiphelo sentonga kwisiseko sesinyithi.

3)Yona'umsebenzi ongalunganga emva kokufaka intonga kwisinyithi esisisiseko.

4)Ukuba ifuna umngxuma omkhulu ofana nombindi we-3-4mm omkhulu kunoko bekulindelwe, yandisa izangqa zomngxuma ecaleni kwesiphelo sentonga yekhabhoni, ngoko ke kungenziwa umngxuma omkhulu.

Iintonga zokugoqa ezigqunywe yi-DC Copper Coated:

Yenzelwe ukugoba itotshi ngokuzenzekelayo. Iintonga zinokudityaniswa yinxalenye yesilisa kunye nenxalenye yesifazane kwaye zisetyenziswe rhoqo ngaphandle kokulahleka kwesiqwenga.

Iinduku zokuGoqa eziDibeneyo zeCopper Coated zeDC:

Yenzelwe abasebenzisi abasebenzisa amandla aphezulu kwaye ikwazi ukusebenza kakuhle kwii-alloys eziqinileyo kunye nokuphosa ngobuchule obuphezulu.

Umbuzo 1: Ingaba eyakhoinkampani i-AO HUIumenzi okanye umrhwebi?
A1: Umenzi, ngamanye amaxesha sinceda abathengi bethu ukuba bathenge iimveliso ezifanelekileyo njengomrhwebi.
Umbuzo 2: Yintoni i-MOQ?
A2. Akukho mda.
Q3: Ngaba singatyelela umzi-mveliso wakho?
A3: Ewe, wamkelekile nangaliphi na ixesha, ukubona kukukholelwa
Q4: Ithini imiqathango yakho yokuhlawula?
A4: Ingxoxo
Q5: Ngaba inkampani yakho iyayamkela indlela yokwenza izinto ngokwezifiso?
A5: Amaqela ezobuchwepheshe kunye neenjineli zobungcali bonke banokukwanelisa.
Q6: Uqinisekisa njani umgangatho?
A6: Kuzo zonke iinkqubo zokwenziwa kwemveliso, sinenkqubo epheleleyo ye-QC yokwakheka kweekhemikhali kunye neepropati zomzimba. Emva kwemveliso, zonke iimpahla ziya kuvavanywa, kwaye isatifikethi somgangatho siya kuthunyelwa kunye neempahla.
Umbuzo 7: Ingakanani ipesenti yamashishini aphesheya?
A7: Imarike yangaphandle imalunga ne-50%; Imarike yasekhaya imalunga ne-50%; kwaye ngoku inani lokuthumela ngaphandle liyanda.
Umbuzo8: Inkampani yakho ingabonelelaiisampulu?
A8: Ewe, singabonelela ngeesampuli simahla, kwaye imithwalo iya kuthwalwa ngabathengi.